You are here

PC-7200 Charger

Lead Acid Battery Charger

6, 12, & 24 VDC; 0.2 to 5.0 Amps

Applications

  • Charges lead acid batteries
  • Optimally designed for batteries up to 100 Ampere Hours

COTS Charger Information

Features

  • Temperature compensation
  • Three stage charger
  • LED displays for charging status
  • Single battery charger
  • Unattended charging

Operatinal Characteristics

  • Three stages of operation
    • Bulk charge mode – replaces 80% of the charge to the battery from a  discharged state – 6 hour time limit
    • Absorption mode – a tapering current replacing the final 20% of the charge to the battery – end current is a pre-programmed value
    • Float mode – maintains the battery’s float voltage.

 

Model No PC-7200
AC Input Range 95 VAC to 265 VAC; 47Hz to 63Hz
Battery Charge Voltage 6 VDC, 12 VDC & 24 VDC Nominal (factory set)
Battery Charge Current

• 0.2 to 5.0 Amps at 6 VDC & 12 VDC (factory set)
• 0.2 to 3.5 Amps at 24 VDC (factory set)

Charger Power Out 120 Watts max.
Battery Connection XLR 3-pin connector; located on front Pin 1: Positive (+); Pin 2: Negative (-); Pin 3: Open
Charger Indicators

LED Indicators:

• Solid red LED - Charger is on ready to charge w/o battery connected
• Flashing green LED – Battery connected, charging
• Solid green LED – Battery connected, float charge mode
• Flashing red LED – Battery connected in reverse, charger error or battery voltage is less than (5VDC, 10VDC or 20VDC)

Weight 3.5 lbs. (1.6 Kg)
Dimensions 8” x 5.6” x 3.0” H (20.3cm x 14.3cm x 7.6cm)
Mounting 4 each #6 screws
Operating Temp 0° C to 50° C (32°F to 122°F)
Storage Temp -40° C to +70° C (-40°F to +158°F)
Humidity 95% relative
Color Black, annodized
Charger Housing Extruded aluminum body, polycarbonate end caps
Harmonized Tariff Code 8504.40.9550
  • Flooded/wet lead acid batteries
  • Valve Regulated Lead Acid (VRLA) batteries
  • GEL lead acid batteries
Authorized Reseller and Distributor for PATCO Electronics Products.