You are here

PC-300-12-110 Charger

Lead Acid Battery Charger

12 VDC; 1.5 Amps; Dual Output

Applications

  • Charges lead acid batteries
  • Optimally designed for batteries up to 25 Ampere Hours

COTS Charger Information

Features

  • Temperature compensation
  • Three stage charger
  • Dual LED displays for charging status
  • Dual battery charger
  • Output can be combined in parallel
  • Unattended charging

Operatinal Characteristics

  • Three stages of operation
    • Bulk charge mode – replaces 80% of the charge to the battery from a  discharged state – 6 hour time limit
    • Absorption mode – a tapering current replacing the final 20% of the charge to the battery – end current is a pre-programmed value
    • Float mode – maintains the battery’s float voltage.

 

Model No PC-300-12-110
AC Input Range 110 VAC to 130 VAC; 60Hz
Battery Charge Voltage 12 VDC Nominal (per output) (see data sheet for specific details)
Battery Charge Current

1.5 Amps (per output) (see data sheet for specific details)

Charger Power Out 22 Watts (per output)
Charger Indicators

LED Indicators (per output):

• Solid green LED - No battery connected, charger on
• Solid yellow LED – Charging
• Solid green LED – Battery connected, float charge mode
• Solid red LED – Battery VDC less than 5.0VDC or connected in reverse

Weight 4.2 lbs. (1.9 Kg)
Dimensions 7” x 3 1/2” x 2 1/2” H (13cm x 9cm x 6.5cm)
Mounting 4 each #6 screws
Operating Temp 0° C to 50° C (32°F to 122°F)
Storage Temp -40° C to +70° C (-40°F to +158°F)
Humidity 95% relative
Color Black, annodized
Charger Housing Extruded aluminum body, polycarbonate end caps
Harmonized Tariff Code 8504.40.9550
  • Flooded/wet lead acid batteries
  • Valve Regulated Lead Acid (VRLA) batteries
  • GEL lead acid batteries
Authorized Reseller and Distributor for PATCO Electronics Products.