You are here

PC-150D-24 Chargerer

Lead Acid Battery Charger

24 VDC, 1.0 Amps

Applications

  • Charges lead acid batteries
  • Optimally designed for batteries up to 25 Ampere Hours
  • For use with intermittently used vehicle batteries

COTS Charger Information

Features

  • DC Input
  • Temperature compensation
  • Three stage charger
  • LED displays for charging status
  • Single battery charger
  • Unattended charging

Operatinal Characteristics

  • Three stages of operation
    • Bulk charge mode – replaces 80% of the charge to the battery from a  discharged state – 6 hour time limit
    • Absorption mode – a tapering current replacing the final 20% of the charge to the battery – end current is a pre-programmed value
    • Float mode – maintains the battery’s float voltage.

 

Model No PC-150D-12-24
DC Input Range 11 to 15VDC
Battery Charge Voltage 24 VDC Nominal (see data sheet for specific details)
Battery Charge Current

1.0 Amps (see data sheet for specific details)

Charger Power Out 30 Watts
Charger Indicators

LED Indicators:

• Solid green LED - No battery connected, charger on
• Solid yellow LED – Charging
• Solid green LED – Battery connected, float charge mode
• Solid red LED – Battery VDC less than 5.0VDC or connected in reverse

Weight 1.7 lbs. (0.75 Kg)
Dimensions 5” x 3 1/2” x 2 1/2” H (13cm x 9cm x 6.5cm)
Mounting 4 each #6 screws
Operating Temp 0° C to 50° C (32°F to 122°F)
Storage Temp -40° C to +70° C (-40°F to +158°F)
Humidity 95% relative
Color Black, annodized
Charger Housing Extruded aluminum body, polycarbonate end caps
Harmonized Tariff Code 8504.40.9550
  • Flooded/wet lead acid batteries
  • Valve Regulated Lead Acid (VRLA) batteries
  • GEL lead acid batteries
Authorized Reseller and Distributor for PATCO Electronics Products.